Ytterberg Scientific, Inc.
15710 W Colfax Ave
Suite 202
Golden, CO 80401
Phone: 303.565.1780
Fax: 303.565.1781

FloorPro®
Floor Flatness Measurement Device

It's Easier to Use, Gets Faster Results,
and Produces Superior Reporting
on More ASTM Specifications

FloorPro® Gives You Immediate Results
Instant F-Numbers
Waviness Index
Straight Edge

The FloorPro® Floor Flatness Profiler
Above: The FloorPro® is a self-propelled, rolling precision inclinometer device that travels 40 feet per minute on hardened stainless steel wheels with an aluminum chassis and parts that are hard anodized to military specification.
The FloorPro® Floor Flatness Profiler

First time out on each project, type in complete header information as prompted in the LCD.  After that, change only the file name and specify the RUN.  SO EASY!

The FloorPro® Floor Flatness Profiler

The FloorPro® has on-board software-driven electronics, a Liquid Crystal Display (LCD), and is electronically automated with a high speed microprocessor. It does not require back-up power because of its "flash RAM" memory.

 
The FloorPro® Floor Flatness Profiler
When you order a FloorPro®, you get everything you need to begin work within minutes, right out of the box.
 
 

TruFlat® Software is included with every purchase of a FloorPro®

Immediate flatness results help contractor crews produce flatter floors.

Effect of changes made in installation procedures can be evaluated without waiting for lab reports.  Focus on the flatness goal helps improve teamwork.  Immdediate FloorPro® results establish your field credibility with the builders. 

Reduces Test Time

The FloorPro® rolls under its own power at 40 ft./min. [12 m/min.] and generates results at the press of a button for three flatness tolerances:

  • F-numbers (ASTM E1115)
  • Waviness Index (ASTM E1486)
  • Straightedge (ACI 117)

You Can Print Ready To Submit Reports

The included TruFlat® software generates professional reports for owners, testing agencies, architects, engineers, and contractors alike. The reports include data, results, graphs, and are made in seconds.

Handles All Flatness Specifications

The FloorPro® works with all three random traffic flatness specifications, as well as analysis of defined traffic wheeltracks in the narrow aisle areas of high stack warehouses, where expensive swing-reach fork lift trucks will operate. 

What You Need To Know About The FloorPro®

The FloorPro® comes complete with all the equipment needed for measuring and downloading to your own computer.

The FloorPro® has on-board software-driven electronics, a Liquid Crystal Display (LCD), and is electronically automated with a high speed microprocessor. It does not require back-up power because of its "flash RAM" memory.

To generate hard copy reports, a nine pin connector cable is used to download the survey data into the TruFlat® Software in your computer. 

All you'll need is a computer, a printer, and paper.

Smaller Than A Shoebox...
And Practically Runs Itself

The FloorPro® is smaller than a shoe box, weighs 11 pounds and is powered by 8 D-cell batteries that last about 10 hours when in constant use.

It is a self-propelled, rolling precision inclinometer device that travels 40 ft. [12 m] per minute on hardened stainless steel wheels with an aluminum chassis and parts that are hard anondized to military specification.

It has a laser headlight for aiming. On the back of the durable cover is an RS 232 (9 pin serial) cable port for rapid data downloading to your computer.

A carrying handle slides out the front of the chassis. On top of the cover, a backlit liquid crystal display (LCD) prompts the user to input the necessary project information that will appear in the TruFlat® reports. At the end of each survey line, the FF and FL number, Waviness, and Straightedge results can be seen immediately in the LCD.

Using The FloorPro® Is Easy
Requires No Special Knowledge
And Saves You Time

At the beginning of the day, type in complete project information as prompted by the LCD. After that, change only the file name and run length. If you want to, change the name of the test section(s) as you go.

For each run, enter the distance, set the FloorPro® at the start point, aim the laser beam at a wall or reflective tape on a target. Then press "RUN". The FloorPro® will automatically drive the specified distance and stop.

As the FloorPro® travels the survey line, many inclinometer slope readings are gathered over a 1" interval every 6", averaged and average saved as the 6" slope. Those slopes are saved in a flash RAM (memory independent of the batteries) and used by the microprocessor to compute the flatness indices displayed on the LCD.

Later, the FloorPro® memory is downloaded to TruFlat® in your computer to produce hard-copy reports.

The FloorPro® comes complete with manuals, in a foam-lined carrying case that can be checked as baggage.

® 2017 Ytterberg Scientific Inc. All Rights Reserved.

Ytterberg Scientific, Inc. • 15710 W Colfax Ave Suite 202 • Golden, CO 80401

Phone 303.565.1780 • Fax: 303.565.1781


Accept Credit Cards